View Single Post
Old 27th Sep 2021, 9:34 pm   #99
DeltaAlpha52
Tetrode
 
Join Date: Feb 2020
Location: Crawley, West Sussex, UK.
Posts: 77
Default Re: MK14 Programming Interface

Hi

thanks for the PCB and for the details of where pin 1 is for each of the opto-isolators,

I gather P2 is designed to allow use of either "flying leads" for the original MK14 or direct connection for the newer ones - where reset is taken to the edge connector.

Cheers
David
DeltaAlpha52 is offline