Quote:
Originally Posted by SiriusHardware
Groan, it's back to front isn't it? The single 'foot' needs to be at the back. Back to the internet...
|
The "foot" at the front is GND on both the PCB and the connector, the left and right connections are GND on the PCB and signal connections on the connector. You could cut the traces connecting the gnd to the pins and re-route things.
If you're buying from Rapid then the "RVFM Black PCB Skeleton Phono Skt" and the red one will fit. If from Farnell or someone else then the Cliff FC68391 works.
I got mine from eBay, and naturally I looked just now and they are nowhere to be seen and its full of the truconnect style! Looks like I made a poor choice (again),