View Single Post
Old 3rd Sep 2019, 10:20 pm   #206
FERNSEH
Dekatron
 
FERNSEH's Avatar
 
Join Date: Mar 2005
Location: Gateshead, Tyne and Wear, UK.
Posts: 7,444
Default Re: Baird T5 restoration project.

Just to compound the horror of this set the tube won't come out. After removing the safety glass and mask pull off the anode connector on the CRT cone. Disconnect the three wires on the tube base. Disconnect the line scanning coil plugs. The tube should lift out, but it doesn't, and of course you can use any form of force when handling these fragile tubes.
This job is not going very well.

DFWB.
FERNSEH is offline   Reply With Quote