Re: High voltage regulator circuit.
I've wired the TL431 as indicated, it works, ta Dave.
I've been thinking how I can drop around 100v so I don't need such high V rated components and came up with this, see attached. It's a potential divider to fix the fets gate at whatever V, so a simple regulator, I'd use this to drop about 80 -100v then connect Dave's regulator circuit to the OP. So far on the bench it works though the R value's may need tweaking. Think of it as a pre regulator regulator.
Can anyone see a better way or poke holes in my circuit please? Andy.
__________________
Curiosity hasn't killed this cat...so far.
|