Quote:
Originally Posted by Diabolical Artificer
All of these suffered from the same fault too, adjustment resulted in the OP jumping to the lowest V setting, then no I was able to make no more adjustment. All of these circuits were a pain to get working.
|
The Maida does work but it is easy to damage it. Both of the circuits you included are NOT short circuit proof. The slightest slip with your crocodule clips and the regulator dies. The 317 version can even fail if there is
no load!
IME it is better to build the Maida reg with
no capacitors on the regulator IC 'in' or 'adj' pins. Those capacitors just create problems.