UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

FERNSEH · 21st Jun 2021, 11:17 pm

Replaced the 500ohm relay current control R304.
Now it is possible to activate the relay by turning the control fully clockwise. The tuner motor will then rotate, turn the control back until the motor stops. Then carry out the instructions described in post No. 54. The remote control handset will activate the motor up to a distance of ten feet but it's function is erratic and not easy to use. Still more work to done.

DFWB.

21st Jun 2021, 11:17 pm	#56
FERNSEH Dekatron Join Date: Mar 2005 Location: Gateshead, Tyne and Wear, UK. Posts: 7,444	Re: HMV 1920 made in 1960. Replaced the 500ohm relay current control R304. Now it is possible to activate the relay by turning the control fully clockwise. The tuner motor will then rotate, turn the control back until the motor stops. Then carry out the instructions described in post No. 54. The remote control handset will activate the motor up to a distance of ten feet but it's function is erratic and not easy to use. Still more work to done. DFWB.