View Single Post
Old 28th May 2021, 3:06 pm   #5
peter_scott
Dekatron
 
peter_scott's Avatar
 
Join Date: May 2003
Location: Edinburgh, UK.
Posts: 3,273
Default Re: Marconi 702 sound problems

You only need to remove the CRT, its metal shield and the cradle that the shield sits in. It might make it easier if you also removed the timebase but I don't think it's essential. It's only held in by four bolts in the side frame although the knobs and panel need to come out too.

The volume and tuning knobs and shafts can remain in the cabinet if you just split them at the couplers at the sound chassis.

Sorry, you also need to remove the speaker, but again only four bolts.

Peter
peter_scott is offline