Re: Baird Garrick
Hi All,
I've now made the CRT clamp that will enable the new tube to be held in place without a wrap around mask.
The first photo shows the dimensions (based on a TV22 CRT clamp).
The second photo shows a cardboard prototype.
The third photo shows a piece of 1mm thick brass cut to shape.
The fourth photo shows it folded into shape.
The last photo shows the clamp fitted in place on the old broken CRT (the focus coil is not fitted at present).
I need to find a brass (non-magnetic) screw and nut to finish it off.
That will be all for a while. First there is Christmas and then when we get back we have to deal with an unexpected house move.
Merry Christmas
Andy
Last edited by beery; 22nd Dec 2018 at 9:57 pm.
Reason: Fordot about brass screw
|