Re: Baird Garrick
Hi all,
Whilst the rest of my family stay on a few more weeks in Malaysia, I am back home and so have the house to myself to do some of the bigger jobs.
The first photo shows the neck box being constructed for the back panel. The box is 7" x 7" x 3 1/2" which is ridiculous really.
The second photo shows the neck box being clamped to the back. After this the back was flipped over and the pilot holes were drilled through for the neck box mounting screws.
The third photo shows the start of painting the back. Towards the top of the photo you can just see the painted neck box. The main back panel has just had the inside of all the holes painted at this time.
The fourth photo shows the vision chassis as it was when I obtained it.
The fifth photo shows how shiny the chassis is after cleaning. The vision receiver has been removed from the left hand side, and on the right hand side the rogue line output transformer and a choke have been removed to facilitate the chassis cleaning.
Cheers
Andy
|