UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

WayneL74 · 17th May 2020, 5:53 pm

That's good. That means the ASTIC is fine.

Can you put the regulator back in"upside down" as it were. This is so we bypass all the compnecnts on there should there be a problem.

Then can you test from T19 to T3. Should be around 22 ohms

17th May 2020, 5:53 pm	#28
WayneL74 Triode Join Date: Jun 2015 Location: Ipswich, Suffolk, UK. Posts: 49	Re: Quiet or no dial tone in a GPO 706 That's good. That means the ASTIC is fine. Can you put the regulator back in"upside down" as it were. This is so we bypass all the compnecnts on there should there be a problem. Then can you test from T19 to T3. Should be around 22 ohms