UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Logik VR950 (Rebadged Samsung VI611?) cam follower gear broken

trellis · 3rd Dec 2022, 11:05 pm

Hmm, yes looks like superglue wouldn't work. It needs some kind of solvent weld adhesive.

But thinking about it, the objective is simply to hold the metal pin in the correct position. I could just use a blob of epoxy, maybe with some reinforcing strips, to hold it in place. Don't even need to reattach the broken off bit.

I think it's worth a try, as it's a nice looking machine, which would be nice to get working.

3rd Dec 2022, 11:05 pm	#3
trellis Pentode Join Date: Mar 2010 Location: Ipswich, Suffolk, UK. Posts: 136	Re: Logik VR950 (Rebadged Samsung VI611?) cam follower gear broken Hmm, yes looks like superglue wouldn't work. It needs some kind of solvent weld adhesive. But thinking about it, the objective is simply to hold the metal pin in the correct position. I could just use a blob of epoxy, maybe with some reinforcing strips, to hold it in place. Don't even need to reattach the broken off bit. I think it's worth a try, as it's a nice looking machine, which would be nice to get working.