Re: Capacitor voltage rating
I must admit that I thought they would be good for 300vdc, not thought of trying a HT test though. Might have a go at that, as it only needs a tx, rectifier and elec cap, oh and a safety fuse or cut-out to protect the secondary parts against possible shorts. I am not worried about trying the test and it would be useful to know for future projects. Usually I would replace like for like but in the case of certain brands, it's not worth taking the chance imho.
The set that I am working on is the well known Ekco TMB272 and I was originally hoping to replace those pesky Hunts 3nf at 400vdc with these ceramics. As it happens I found some 3n3 630vdc polyesters, so am using those instead.
I would also like to add that I have been looking through the invaluable previous threads on the Ekco TMB272 and now realise just what a poor condition mine is in. However, I am determined not to let it get the better of me.
|