UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

harvestgold · 25th Nov 2020, 4:36 pm

Thanks again for the replies,

I reckon in the first instance, I'll try a request in the wanted section to see if anyone has a spares deck they wouldn't mind pinching the part from. Typically, I have a few BSR spares decks myself, but no UA25s or any with a similar arm.

Otherwise I'm certainly going to have a go at making one, and if I run into any problems, there's a gentleman who lives near to me with far greater skills in this area than mine!

I have just popped out to the workshop and given the UA25 a check over and thankfully, nothing else seems to be missing and it cycles correctly (other than the arm not lifting, of course), so why the plate is missing is anyone's guess.

Thank you for the advice, Techman - it is greatly appreciated.

Neil.

25th Nov 2020, 4:36 pm	#8
harvestgold Hexode Join Date: Jul 2005 Location: Worcestershire, UK. Posts: 282	Re: BSR UA25 Arm Height Part Missing Thanks again for the replies, I reckon in the first instance, I'll try a request in the wanted section to see if anyone has a spares deck they wouldn't mind pinching the part from. Typically, I have a few BSR spares decks myself, but no UA25s or any with a similar arm. Otherwise I'm certainly going to have a go at making one, and if I run into any problems, there's a gentleman who lives near to me with far greater skills in this area than mine! I have just popped out to the workshop and given the UA25 a check over and thankfully, nothing else seems to be missing and it cycles correctly (other than the arm not lifting, of course), so why the plate is missing is anyone's guess. Thank you for the advice, Techman - it is greatly appreciated. Neil.