UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Edward Huggins · 24th Nov 2020, 6:15 pm

Yes, this a BSR UA25. I don't have the exploded views to hand, but from memory there should be a small plate that is secured by that grub screw, holds the 4 tone arm wires in-situ and provides a platform for the rising pin to make contact with. I just don't know where you will find this part other than for it to come from a donor deck.

24th Nov 2020, 6:15 pm	#2
Edward Huggins Dekatron Join Date: Sep 2015 Location: Southwold, Suffolk, UK. Posts: 8,328	Re: BSR UA25 Arm Height Part Missing Yes, this a BSR UA25. I don't have the exploded views to hand, but from memory there should be a small plate that is secured by that grub screw, holds the 4 tone arm wires in-situ and provides a platform for the rising pin to make contact with. I just don't know where you will find this part other than for it to come from a donor deck. __________________ Edward.