View Single Post
Old 9th Dec 2020, 11:41 pm   #152
Buzby123's Avatar
Join Date: Oct 2011
Location: Culcheth, Cheshire, UK.
Posts: 455
Default Re: I found it! A very sorry looking MK14.

I'm hoping this weekend to put the Vicky board into the Micky cabinet, so I can test my peripherals.

First up will be the display. I don't evisage any incompatible connector issues here, as the bubble LED is working fine, so the layout of the LED connector must be the same as a real MK14.

But what about the keyboard connector, is that the same ?.

I know I'm going to have to tread carefully around this connector, as I can see I've cut a track and soldered a link on Micky, but I think they're both something to do with the reset button. ( I seem to remember the SoC instruction text for removing ROM images also did something with the reset circuit. It might be that. )

So, apart from the GND and reset pads ( the first two near the reset button ), are the other pads in the same order as a real MK14 ?.


Attached Thumbnails
Click image for larger version

Name:	Reset_btn_mod.jpg
Views:	60
Size:	43.5 KB
ID:	222241  
Buzby123 is offline