View Single Post
Old 8th Jun 2016, 5:13 pm   #1
threeseven
Octode
 
threeseven's Avatar
 
Join Date: May 2010
Location: Worcestershire, UK.
Posts: 1,872
Default Beovision LX2502 manual needed?

Have recently put this set into service and quite like it, so I'd like to sort out a couple of issues it has, for which a manual would make easier.
Issue one, intermittent switch on fault. When turning on from standby with the remote, the standby light goes out momentarily but then comes back on with the set refusing to turn on. Repeatedly pressing the on the remote on button sometimes kicks it into life, if not then it has to be powered down, wait for 30 seconds or so, then it will normally turn on.

Issue two, when the set is first turned on, there is line instability at the bottom of the frame, particularly on bright scenes or white background. Five times out of ten this will continue and then there is a sudden pin cushion. That can be cleared by powering off and on between 1 and 4 times. If the line instability doesn't go to pin cushion, it clears and is then fine.

Also, if someone has a couple of bass drivers spare, I'd be grateful. The ones in the set have lost their surrounds.

Any help with the faults most welcome as I'm not experienced with colour sets
__________________
BVWS member
threeseven is offline