View Single Post
Old 26th Oct 2020, 8:30 pm   #22
Lef de art
Pentode
 
Join Date: Oct 2019
Location: Nicosia, Cyprus.
Posts: 100
Default Re: McMichael 381 Valve Radio project

Quote:
Originally Posted by ms660 View Post
Quote:
Originally Posted by Lef de art View Post
So it is better to leave it disconnected ?
My apologies, I made an error in my previous post when I said to connect it to that lower tag on the pot in your last photo, if you were to connect it to there it would upset the AGC delay voltage so I would leave it disconnected and concentrate why there is poor reception when using the push buttons, the poor reception won't be anything to do with that wire being disconnected.
Lawrence.
Thanks Lawrence.
I disconnected it. I think you are correct with guessing.
I believe to, the potentiometer it is replaced. It is shorter from the rest switches. Even the bakelite button stays difficult in his position (because the switch is shorter and the button screw can't fix the button correctly) ..

I don't know what else to check...for the presset buttons .
Maybe i will leave it as it is.
Lef de art is offline   Reply With Quote