View Single Post
Old 14th Jun 2019, 11:27 am   #19
micheal
Pentode
 
Join Date: Mar 2007
Location: Croydon, London, UK.
Posts: 111
Default Re: Telequipment D75 scope.

You have to undo slotted recessed nut i use a pair of pointed nose pliers and two hands one on handles of pliers and the other on the jaws.
As for recalibrating try not to turn the thin shaft, and when putting back together again align knob screw with indentation on shaft , there are calibration pots which allow you to fine fine tune the delay time multiplier control in alignment and set up instructions in s2a manual .

Mike
micheal is offline