UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Station X · 24th Apr 2020, 2:29 pm

Sometimes took the form of a screw with a locknut. A special feeler gauge with a hole in it was positioned between the armature and pole face with the screw thread passing through the hole. The screw was then adjusted until the gauge was just gripped.

24th Apr 2020, 2:29 pm	#8
Station X Moderator Join Date: Jan 2003 Location: Ipswich, Suffolk, IP4, UK. Posts: 21,289	Re: Bellset 44 problem with indicator Sometimes took the form of a screw with a locknut. A special feeler gauge with a hole in it was positioned between the armature and pole face with the screw thread passing through the hole. The screw was then adjusted until the gauge was just gripped. __________________ Graham. Forum Moderator Reach for your meter before you reach for your soldering iron.