Quote:
Originally Posted by AC/HL
Beware references to the SRG300. It is the same basic chassis, and it is not isolated as noted.
The SRG600 should have the additional isolation transformer, not illustrated on the trader notes because it is in the cabinet.
|
Hi Bill
Many thanks for your reply, there has been some debate about the appearance of an isolation transformer, but interestingly although this gram is wired directly to the deck then goes to the chassis with no isolation transformer, I have have just used a torch to look in the rear of the LH speaker void and there is a disused cable in there....
It could well be this went down and was removed. Very disappointing.
Either way I need to fit one to be safe, and again if anyone has any leads on one i can fit, it would be much appreciated.