Re: Telequipment D34 Scope
Telequipment D34.
All I have is the circuit diagram of the D34, without any note of the semiconductor or CRT type numbers. It is clearly an uprated D32, for which I do have the complete manual.
I suspect the rest of the operating and setup conditions will be the same, except that as the D34 uses a different cathode ray tube, the operating voltages will be different, so Andy's offered tube voltages will not be helpful.
Perhaps if you could tell me what the tube type number is, I can look up my data and provide you with the typical operating conditions, which are likely to have been followed.
It is interesting to see that the tube is apparently directly heated with a hum-bucking adjustment, presumably to allow a lower heater current, useful for a battery operated scope. A most unusual feature, if appearances are correct.
wme_bill.
Last edited by WME_bill; 24th Oct 2020 at 10:02 am.
|