View Single Post
Old 23rd Oct 2020, 3:49 pm   #3
CrazySwede
Tetrode
 
CrazySwede's Avatar
 
Join Date: Sep 2020
Location: Matfors, Sweden
Posts: 77
Default Re: Platter spindle on Garrard Zero100s not centered

Thanks for answering, Frank!
Looking att the platter rotating I cannot se any movement or other signs that it is not centered. So the bearing i think is ok. It seems as if the problem is how the spindle is attached to the platter.
CrazySwede is offline