Re: Putting RMB on a pedestal
A short between screen and ground on V1 turned out to be the valve itself which has no markings and so is probably a DK91, a bit suspect but there are no other signs of bodgery and the seller said it hadn't been switched on since the 60s. While waiting for delivery of a DK92 and talking of bodgery I used a beermat as a spacer between turntable and case and replaced the flex with a flat one from a cassette lead. The turntable is not very thick so this made it protrude near enough all the way out but I am satisfied with this solution.
|