UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

bionicmerlin · 10th Jul 2020, 2:12 am

Update so far.
I have now fitted the parts that John kindly sent me (Thank you). As far as I’m concerned this has sorted the width problem. I will do a little tweaking later as I think I can improve on the picture.i will for curiosity try the old EHT tray again . I will also double check some of the resistors that has been mentioned.
I’m having a bit of distortion and pulling on the picture on 625 switching on from cold that corrects its self after about 30 seconds. I’m thinking it could be the tuner as I haven't got round to cleaning the grease inside the tuner as I was advised to.
Photo on 625 with improved width. Andy

10th Jul 2020, 2:12 am	#58
bionicmerlin Heptode Join Date: May 2010 Location: Warminster, Wiltshire, UK. Posts: 682	Re: Marconi 1400 birthday present Update so far. I have now fitted the parts that John kindly sent me (Thank you). As far as I’m concerned this has sorted the width problem. I will do a little tweaking later as I think I can improve on the picture.i will for curiosity try the old EHT tray again . I will also double check some of the resistors that has been mentioned. I’m having a bit of distortion and pulling on the picture on 625 switching on from cold that corrects its self after about 30 seconds. I’m thinking it could be the tuner as I haven't got round to cleaning the grease inside the tuner as I was advised to. Photo on 625 with improved width. Andy Attached Thumbnails __________________ I bet that car doesn't have a suppressor.