View Single Post
Old 9th Apr 2020, 5:26 pm   #25
IKC2E51R8
Hexode
 
Join Date: Aug 2018
Location: Dublin, Republic of Ireland.
Posts: 492
Default Re: Help with a Philips Anubis AAC Set

Hi all

Thanks for the replys, so i got the CRT Heaters back, only with a magnifing glass did i spot that pin 1 of M6 that conmects to Heater Pin 9 of thr Flyback wasnt making making contact with the board, sorted that and the Heaters glow a beaitiful Orange.

Next Problem...
Vertical collapse...thinking it could be the chip itself but im gonna resolder the pins first as they look about ropey, the potentiometer for vertical height is gonna have to be replaced also as its damaged (doesnt turn)

Getting closer to solving this one, thanks everyone for the help so far...any suggestions on the vert collpase
__________________
Cheers,
Luke
IKC2E51R8 is offline