UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

IKC2E51R8 · 6th Apr 2020, 1:18 am

I'm confused because on both the Block diagram for the CRT Base and the PCB layout of the Base it shows Pin 4 is the supply and pins 1 & 3 are the heater pins, but on the schematic layout it has pin 1 as the supply?

6th Apr 2020, 1:18 am	#11
IKC2E51R8 Hexode Join Date: Aug 2018 Location: Dublin, Republic of Ireland. Posts: 494	Re: Help with a Philips Anubis AAC Set I'm confused because on both the Block diagram for the CRT Base and the PCB layout of the Base it shows Pin 4 is the supply and pins 1 & 3 are the heater pins, but on the schematic layout it has pin 1 as the supply? Attached Thumbnails __________________ Cheers, Luke