View Single Post
Old 17th May 2021, 1:11 pm   #19
Jamey80
Diode
 
Join Date: Apr 2021
Location: Sitges, Spain
Posts: 7
Default Re: Metamec A909 clock- broken coil

If I unwind it gently on to a suitable bobbin as far as the break, would I damage the insulation on the wire or would it be ok? Not sure how much you can flex enamelled wire, but reusing it would avoid problems sourcing a replacement.
Looks like I'm going to need to find some meccano.
I will protect it with a 20mA fuse if I rewind it like this- don't want it catching fire if I screw something up!
Jamey80 is offline