UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

llama · 4th Feb 2021, 7:10 pm

Going back to the original recommendation, I've just looked on ebay and measured the brights on my Dynatron Nomad which has the same (almost?) knobs as a Roberts R200.

The Dyna seems to be 17mm across - possibly 18mm on the R200.

Anyway, most suppliers have 15mm and 19mm but the colour can be an issue. Some say "metal" as the colour which isn't helpful and the colour rendition on my monitor isn't helped by the glint on the photos. I may buy a set of 5 as an experiment.
Graham

4th Feb 2021, 7:10 pm	#9
llama Octode Join Date: Jun 2006 Location: St Osyth, Nr Clacton, Essex, UK. Posts: 1,482	Re: Radio Knob Brights Going back to the original recommendation, I've just looked on ebay and measured the brights on my Dynatron Nomad which has the same (almost?) knobs as a Roberts R200. The Dyna seems to be 17mm across - possibly 18mm on the R200. Anyway, most suppliers have 15mm and 19mm but the colour can be an issue. Some say "metal" as the colour which isn't helpful and the colour rendition on my monitor isn't helped by the glint on the photos. I may buy a set of 5 as an experiment. Graham __________________ Half my stuff is junk - trouble is, I don't know which half!