View Single Post
Old 22nd Mar 2021, 3:19 pm   #208
Join Date: Aug 2011
Location: Newcastle, Tyne and Wear, UK.
Posts: 8,539
Default Re: I found it! A very sorry looking MK14.

Originally Posted by Buzby123 View Post
One issue I have is IC16 pin 1. It looks like this is one of the unused gates, as pin 2 is connected to R5, but pin 1 is loose.
Do you mean on the top side or the underside? Tim's image of the underside of an Issue II posted a while back in this thread should be good enough to see if anything goes to pin 1 on the underside.

If you haven't worked it out by this evening I will dig mine out and make a few measurements to see if anything goes to IC16 pin 1 on mine.
SiriusHardware is offline