Re: Baird T5 restoration project.
Hi Anthony,
The restoration of the Baird T5 is progressing well. Just two more jobs to do before the wood veneers are applied to the surfaces of the cabinet front panel, the control panel and the CRT screen panel.
First task to do this weekend is make the specially shaped beading fitted between the control panel and the upper panel, see the attached pictures. It might be possible to use ordinary stock beading available from B & Q. Again, the saw bench will cut out the 30 degree chamfer.
The second task is to make the cut out in the front panel for the door to access the timebase controls.
DFWB.
|