View Single Post
Old 20th Dec 2019, 1:00 pm   #9
Eidolon
Hexode
 
Join Date: Dec 2012
Location: Worcester, Worcs, UK.
Posts: 257
Default Re: Philips 22CS1002/05t TV

It may well have 'been boosted to death' actually. The local repair 'expert', who wrote off my ITT v2000 machind after putting it back together wrong came round a couple of years or so ago, when it was taking about 5 minutes to warm hp, and some tinkering in the back, soldering and turning things.
It fixed the warm up problem for a couple of months, then it started to come back and got much worse, now taking about 40 mins to warm up.

I just can't get on with the picture anymore, since the new fix, and i think it's because of the blue nature of the monochrome. I didn't have this problem beflre, the blacks were fine. Having been using it a bit now, i think that the 'monochrome blue' is why it looks so bad. Previously the picture was pretty much fine, once it hax warmed up, other than going red when it had a lot of bright white on screen.

Thanks for the list of compatible tubes. Its a matter of trying to find one. I'm fairly sure I'll need to replace it if possible
Eidolon is offline