Quote:
Originally Posted by SiriusHardware
That's the thing, they are very high maintenance, but worth keeping in tip top condition. One thing you should never do is try to clear a hole which you suspect might have a broken component or IC pin in it, once something like that gets jammed in the narrow channel in the nozzle, it's never coming out.
|
You will laugh then when you see the video - almost every pin from the chopped off edge connector de-soldered from the expansion board at the back as well as the hole and got sucked into the channel - luckily as they were fat and cut off they jammed poking out and a pair of pliers allowed them all to be removed... luck rather than judgement.