Re: Pimp my MK14
I don't know if you have provided any kind of standoffs on the undertray but it might need cutaways to allow original edge connectors to fit onto the edge connectors - those connectors need a fair bit of height and depth both above and below the PCB.
If there are standoffs, then how about also including fixing holes in the undertray so that it can be screwed to a baseplate or chassis or the inside of a larger enclosure using screws with countersunk heads - one problem with both original MK14s and the issue VI is how to mount them onto any kind of backboard or chassis when the only screw holes provided on the PCB are those intended for the keypad.
|