So I'll start with UE7/8 tomorrow but try to reuse UF8/9 if at all possible?
Colin.
Quote:
Originally Posted by SiriusHardware
Yes, sockets for those too. You only want to have to desolder the video RAM ICs once. This is one case where I might suggest conventional sockets rather than turned-pin because the pins of the desoldered ICs (should you need to desolder them) will be quite short and will have a thin layer of solder on them.
They may be easier to plug into conventional sockets than into turned pin sockets, if you need to refit them for any reason.
|