UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

vintage_8bit · 28th Dec 2021, 2:41 pm

I usually, take lots of photos & make drawings when I disassemble anything. So why can't I find where 2 wires go?.

I'm now re-fiting the 1st VFO & not sure which way round the (orange from V7 anode) & (red from R51 /52) wires go. The pair go to pins 3 & 4 on the input to the 40MHz B.P.F. If I could identify the pin numbers on the B.P.F. all would be well. Colin.

28th Dec 2021, 2:41 pm	#15
vintage_8bit Heptode Join Date: Feb 2013 Location: Rainham, Kent, UK. Posts: 525	Re: RA17L Serial No = N 3392 I usually, take lots of photos & make drawings when I disassemble anything. So why can't I find where 2 wires go?. I'm now re-fiting the 1st VFO & not sure which way round the (orange from V7 anode) & (red from R51 /52) wires go. The pair go to pins 3 & 4 on the input to the 40MHz B.P.F. If I could identify the pin numbers on the B.P.F. all would be well. Colin. Attached Thumbnails