UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Strange issues with Panasonic NV-HS830

No.1 Labrat · 4th Aug 2021, 4:54 am

Hi.
I would look for dry joints on the end sensors and the led that sits below the prism.
Then clean the mode switch on the board below the mechanism.
The fact that commands appear on the display means that the micro is working but the loading motor is not being driven.

It looks to have the Z mechanism.
I tried to attach the manual for the deck, but it is a little too large.

Best of luck.

Wayne.

4th Aug 2021, 4:54 am	#7
No.1 Labrat Triode Join Date: Jul 2014 Location: Penrith, New South Wales, Australia Posts: 26	Re: Strange issues with Panasonic NV-HS830 Hi. I would look for dry joints on the end sensors and the led that sits below the prism. Then clean the mode switch on the board below the mechanism. The fact that commands appear on the display means that the micro is working but the loading motor is not being driven. It looks to have the Z mechanism. I tried to attach the manual for the deck, but it is a little too large. Best of luck. Wayne.