UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

staticmind · 29th Sep 2019, 7:05 pm

Thank you both of you.
I'll be sure to remove the DY87 when powering up then - would also be much safer, when there is no EHT.

Edward, it has one speaker only - the 21" one seems to have two. I'll make a high quality sound recording, and post some pictures of the progress.

Right now I have carefully removed the CRT in order to clean the front glass. The previous owner was a bit of a smoker.
The metal screen between the CRT and front glass also badly needs a new sealing to the CRT - the old foam had turned to dust. I'll try with some 3M 4516 vinyl foam tape and see how that works out.

29th Sep 2019, 7:05 pm	#4
staticmind Tetrode Join Date: Sep 2019 Location: Aalborg, Denmark Posts: 97	Re: B&O Capri 606 TV (17") restoration Thank you both of you. I'll be sure to remove the DY87 when powering up then - would also be much safer, when there is no EHT. Edward, it has one speaker only - the 21" one seems to have two. I'll make a high quality sound recording, and post some pictures of the progress. Right now I have carefully removed the CRT in order to clean the front glass. The previous owner was a bit of a smoker. The metal screen between the CRT and front glass also badly needs a new sealing to the CRT - the old foam had turned to dust. I'll try with some 3M 4516 vinyl foam tape and see how that works out.