View Single Post
Old 20th May 2021, 9:22 am   #15
Dave Moll
Dekatron
 
Dave Moll's Avatar
 
Join Date: Feb 2005
Location: West Cumbria (CA13), UK
Posts: 6,118
Default Re: Dialling problems with 232 and bellset 26

I have now found some reliable cables, and as implied above, the problem was that I had A leg and B leg transposed. I shouldn't have assumed that red = B leg and white = A leg. Connections to the 232 are:

T1 (red): A leg
T2 (green): "ring" wire
T3 (white): B leg

Wired this way, everything (including dialling out) works correctly. Thank you to everyone (especially Russell) for the assistance.
__________________
Mending is better than Ending (cf Brave New World by Aldous Huxley)
Dave Moll is offline