Re: Dialling problems with 232 and bellset 26
Does it work right if you use T1-B1, T2-B2 and T3-B4 ?
That way you get the 2 uF cap between T2 and T1, that works as a part of the anti-sidetone circuit, and as a capacitor for the ringer as in the old days.
If you use the typical UK system with master socket and no ringer capacitor in the phone you have to change the ringer-capacitor connection.
In my Norwegian setup the only needed line wires will be T1 and T3
dsk
Last edited by dagskarlsen; 18th May 2021 at 10:24 am.
Reason: Adding text
|