UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Help needed with

3pinplug · 8th Feb 2023, 8:29 am

Hi Paula
Yes you were spot on i had fitted C11 when i replaced it recently the wrong way round!!! I have fitted a new one ( correct orientation) and also checked the others i did on the board and they are all ok. Unfortunately run out of time as off to work now but will conduct the remainder of tests this evening. I also forgot to confirm for Peter i read 37.501khz when i rechecked, i had knocked one of the flick switches.

8th Feb 2023, 8:29 am	#60
3pinplug Pentode Join Date: Jun 2016 Location: Kent, UK. Posts: 190	Re: Help needed with - Racal Dana 9081 Hi Paula Yes you were spot on i had fitted C11 when i replaced it recently the wrong way round!!! I have fitted a new one ( correct orientation) and also checked the others i did on the board and they are all ok. Unfortunately run out of time as off to work now but will conduct the remainder of tests this evening. I also forgot to confirm for Peter i read 37.501khz when i rechecked, i had knocked one of the flick switches.