UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Help needed with

3pinplug · 5th Feb 2023, 11:22 pm

Hi Peter
The scope traces were taken with pin 15 disconnected and my scope probe on pin 13. The volts / div was set to 5v.

Ok i will disconnect the wires suggested snd do some further measurements. The manual i have has table 2 but on a different page, mine appears to be a combined 9081 & 9082 manual, do you have just the 9081 manual?
Regards
Mark

5th Feb 2023, 11:22 pm	#54
3pinplug Pentode Join Date: Jun 2016 Location: Kent, UK. Posts: 190	Re: Help needed with - Racal Dana 9081 Hi Peter The scope traces were taken with pin 15 disconnected and my scope probe on pin 13. The volts / div was set to 5v. Ok i will disconnect the wires suggested snd do some further measurements. The manual i have has table 2 but on a different page, mine appears to be a combined 9081 & 9082 manual, do you have just the 9081 manual? Regards Mark