View Single Post
Old 17th Sep 2020, 11:14 pm   #49
Mark1960
Heptode
 
Join Date: Mar 2020
Location: Kitchener, Ontario, Canada
Posts: 777
Default Re: I found it !. A very sorry looking MK14

Rather than bend pins on an ins8060, try removing the proms and ram, then add pullups for the data lines that donít already have them. Should run CAD instruction using auto index P3 which should then cycle through memory, every third access should read from an out of sequence location but maybe not too hard to check the pattern.
Mark1960 is offline