View Single Post
Old 20th Jan 2023, 11:20 am   #6
DonaldStott
Octode
 
DonaldStott's Avatar
 
Join Date: Aug 2015
Location: Glasgow, UK.
Posts: 1,840
Default Re: Heathkit RF1U Signal Generator

I checked the 1.1mH chokes using both my DMM and MK-328 tester.

The bottom choke measured 1.19mH (18Ohms) and has continuity while the top choke measured 1.18mH (18Ohms) and also has continuity - so those check out ok.

Some of the solder joints around the switch look a bit tired, dull and grey so I will reflow those and see what happens?
__________________
BVWS Member
DonaldStott is offline