View Single Post
Old 17th May 2021, 2:38 pm   #20
paulsherwin
Moderator
 
paulsherwin's Avatar
 
Join Date: Jun 2003
Location: Oxford, UK
Posts: 27,787
Default Re: Metamec A909 clock- broken coil

I must admit that in these circumstances I would just fit a quartz movement. This is a relatively modern clock and would have been made on the cusp of the quartz era anyway. Rewinding the coil is going to be very difficult, especially if you have no experience of such things.

You could retain the original movement and refit it if you come across a suitable coil in the future.
paulsherwin is online now