UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

MALC SCOTT · 7th Dec 2012, 10:38 am

If the overscan is horizontal check for dry joints around the loptx area. Could be one of the e/w diodes are faulty. If it is vertical overscan it may just need the height adjusting. The 4.7mfd 250v rgb h.t smoothing cap will need replacing. This will improve the picture quality. This is located at the top of the chassis near the focus pot.
Very good sets, they plod on for years with little trouble, Malc.

7th Dec 2012, 10:38 am	#3
MALC SCOTT Octode Join Date: Aug 2006 Location: Willington, County Durham, UK. Posts: 1,499	Re: Philips 22CS1002/05T TV. A few queries If the overscan is horizontal check for dry joints around the loptx area. Could be one of the e/w diodes are faulty. If it is vertical overscan it may just need the height adjusting. The 4.7mfd 250v rgb h.t smoothing cap will need replacing. This will improve the picture quality. This is located at the top of the chassis near the focus pot. Very good sets, they plod on for years with little trouble, Malc. __________________ Malc Scott