Pye P114BQ Jewel case Speaker transformer
 

Further to my wanted posts of the above Pye radio, does anyone have a Speaker transformer for the above?
Its No is 077072 570 ohms .

Happy to pay etc etc .

Re: Pye P114BQ Jewel case Speaker transformer
 

I have an Elstone MTO replacement output transformer from a Pye P131MBQ, which has a DL96 output valve as does the P114BQ. The transformer mounts on the speaker and being a replacement type has ratios of 80:1 or 42:1. The P131MBQ + MTO used 80:1. Primary resistance of 770 ohms for 80:1, around 350 ohms for 42:1.

The trademark Elstone green paint is peeling from the sides of the lamination clamp, which appears to be galvanised underneath. £8 plus p&p if interested. I can take a photo if you want more detail.

Ron

Re: Pye P114BQ Jewel case Speaker transformer
 

That sounds like it might do the trick Ron.
A picture would be good but i think it will be fine regardless.
Again this is not for me its for someone who is restoring this radio so will need to check with him first .
Thank you.

Re: Pye P114BQ Jewel case Speaker transformer
 

Here are some photos of the Elstone MOT transformer. Fixing centres are 2.125". The primary resistance of the 80:1 winding is 706 ohms, not as previously stated.

It weighs 200g without packaging.

The cheapest Royal Mail second class small parcel, not signed for is £2.85.

Ron

Re: Pye P114BQ Jewel case Speaker transformer
 

And the laminations from the bottom.

Ron

Re: Pye P114BQ Jewel case Speaker transformer
 

Pm sent to you Ron.