UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Television Standards Converters, Modulators etc (https://www.vintage-radio.net/forum/forumdisplay.php?f=95)
-   -   2.5kV power supply (https://www.vintage-radio.net/forum/showthread.php?t=185280)

Richardgr 29th Oct 2021 12:22 pm

2.5kV power supply
 
1 Attachment(s)
This is available on a local site, and I'm sure postage would be possible to the UK. I've never seen one before - a 2.5kV power supply. Is that cat nip to a TV restorer?

2.5kV power supply

GrimJosef 29th Oct 2021 12:45 pm

Re: 2.5kv power supply
 
We used to use similar things at work for powering vacuum photodiodes. Our supplies weren't capable of delivering much current, but the dark current in the diodes was generally very small.

Cheers,

GJ

Guest 29th Oct 2021 4:54 pm

Re: 2.5kV power supply
 
Is that 2.5 or 25 kV?

Uncle Bulgaria 29th Oct 2021 6:05 pm

Re: 2.5kV power supply
 
It looks European to me with a comma separator - doesn't that say "A2,5k" bottom right?

Ed_Dinning 29th Oct 2021 8:00 pm

Re: 2.5kV power supply
 
Hi Folks, should be OK for the VCR97 type of set but too low for a TV22.
On the up side I suspect it has low current so will not kill you (but nasty bite) the way a mains derived type would

Ed


All times are GMT +1. The time now is 3:04 pm.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.