UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   General Vintage Technology Discussions (https://www.vintage-radio.net/forum/forumdisplay.php?f=29)
-   -   IWATSU DMS 510 Memoryscope Probes (https://www.vintage-radio.net/forum/showthread.php?t=172135)

BrianAllen 16th Oct 2020 6:57 pm

IWATSU DMS 510 Memoryscope Probes
 
Good evening all,

I today acquired a scope by generous donation fron Bob (woodchips) and just need to find an instruction manual and a probe.

Are these probes specific to the above scope or can I purchase any type of probe?

Can anyone let me know what I need and where to purchase?

Thank you.

Brian

Electronpusher0 17th Oct 2020 7:32 am

Re: IWATSU DMS 510 Memoryscope Probes
 
Any standard scope probes should work with this. You will just need to adjust the trimmer in the probe for best square wave if you get a x10 type (or a switchable one).

Peter

BrianAllen 17th Oct 2020 9:11 am

Re: IWATSU DMS 510 Memoryscope Probes
 
Thank you Peter.

Brian

woodchips 17th Oct 2020 10:46 am

Re: IWATSU DMS 510 Memoryscope Probes
 
Brian. don't buy any probes!

This transfer has been active since Christmas, but virus intervened. I had some probes to go with the scope but in the time, and shifting around, they got separated.

There are two X10 and one X1 probe which should do you. As is usual one of the spring clips is missing but two should do, one for signal, one for external trigger.

PM sent

BrianAllen 17th Oct 2020 11:03 am

Re: IWATSU DMS 510 Memoryscope Probes
 
Great, very much appreciated Bob.

Take care.

Brian


All times are GMT +1. The time now is 3:42 am.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.