UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Forum Announcements and Comments (https://www.vintage-radio.net/forum/forumdisplay.php?f=18)
-   -   The Thanks Thread (https://www.vintage-radio.net/forum/showthread.php?t=60832)

Nymrod121 20th Jun 2016 11:21 am

Re: The Thanks Thread
 
My pleasure, Colin :)
Cheers
Guy

Ti Pwun 21st Jun 2016 6:59 am

Re: The Thanks Thread
 
Thank you to Hugh (Stockden) for the Storno TX - much appreciated.

Nymrod121 22nd Jun 2016 9:00 pm

Re: The Thanks Thread
 
Thank you to Jeremy (Pamphonica) for the Microsoft book covering 'MSDOS 6.2. Windows for Workgroups and Windows 3.1'.
Cheers, Jeremy :thumbsup:
Best wishes
Guy

Reelman 23rd Jun 2016 11:26 pm

Re: The Thanks Thread
 
Many thanks to Bryan M for the power leads, just what I needed.
Cheers!

TonyDuell 24th Jun 2016 10:00 am

Re: The Thanks Thread
 
Many thanks to 'Welsh Anorak' for the Panasonic 8-track recorder. It's going to give me hours of entertainment (and that's before I put a tape in it.)

tony brady 25th Jun 2016 5:23 pm

Re: The Thanks Thread
 
thank you to TonyDuell for the Tek 7613 scope mainframe - it was a pleasure to meet you. I hope the mainframe will allow me to fix a couple of my scopes that are in the roundtoit pile!

cheers
Tony

Nymrod121 29th Jun 2016 3:46 pm

Re: The Thanks Thread
 
Many thanks to Nicklyons2 for the 2 x Musa patch panels plus a large quantity of 'U'-links, 2 x PO316 jackfields and the lacing bars to go with them. I'll have to learn how to do cable-lacing now (I knew that scanning in 'BBC ED122' would come in handy sooner or later :) )
Thank you again, Nick :thumbsup:
Guy

paulsherwin 29th Jun 2016 4:08 pm

Re: The Thanks Thread
 
Thanks to Richard (rovernut) for the computer memory, and belated thanks to Ian (whyperion) for his old sewing machine pedal. Both were FOC and they didn't even ask for the postage.

Ti Pwun 2nd Jul 2016 5:19 am

Re: The Thanks Thread
 
Big thanks to Pamphonica (Jeremy) for the wire (and the metal boxes that just happen to accept a panel mount SO259 and a BNC socket without any need for drilling - perfect for a couple of test gear projects I have in mind). Very much appreciated.

Jon.

Ti Pwun 2nd Jul 2016 11:53 am

Re: The Thanks Thread
 
Big thanks also to Phil (pbengtech) for the used Plessey and Hunts caps for restuffing - just the job. Much appreciated.

Jon.

TonyDuell 2nd Jul 2016 4:44 pm

Re: The Thanks Thread
 
Thanks to 'Retrotechie' for the beautiful Sony PVM9044 monitor. I hope I can get it working, it will be very useful to me.

thomass 2nd Jul 2016 5:40 pm

Re: The Thanks Thread
 
Thanks to Mark (mhennessy) for lovely Marconi 2438 universal counter and the Marconi nixie counter.

Phil G4SPZ 3rd Jul 2016 4:08 pm

Re: The Thanks Thread
 
Thank you to Hugh ("Stockden") for the very nice Avo Model 7, and also for keeping it for me until he was coming to Bewdley to deliver it in person! What a gentleman. MNI TNX OM.

Pilot Mariner 3rd Jul 2016 7:45 pm

Re: The Thanks Thread
 
Thankyou very much to Paula (frsimen) for excellent advice in tracking down difficult fault on my Grundig 2012.

Mark

Steve_Bell 4th Jul 2016 6:50 pm

Re: The Thanks Thread
 
Thanks very much to Guy (Nymrod121) for the FOC 15v PSU.

Reelman 4th Jul 2016 9:24 pm

Re: The Thanks Thread
 
And thanks also from me to Guy (Nymrod121) for the FOC 15v PSU. Much appreciated.
Peter

Ti Pwun 9th Jul 2016 10:41 am

Re: The Thanks Thread
 
Many thanks to Joe (ThePillenwerfer) for the NOS LP1179 module. Very much appreciated.

ThePillenwerfer 10th Jul 2016 12:00 am

Re: The Thanks Thread
 
Thanks to Ti Pwun for relieving me of it. :)

Ti Pwun 10th Jul 2016 7:18 pm

Re: The Thanks Thread
 
Thank you to Anton (G3VFB_Anton) for the books. Greatly appreciated.

Stylo N M 16th Jul 2016 4:19 pm

Re: The Thanks Thread
 
A very big thank you to 60 oldjohn for very kindly sending me some 10k resistors, just thought it would be nice to give him a mention.

Thank you, Paul.


All times are GMT +1. The time now is 9:43 pm.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.