UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Forum Announcements and Comments (https://www.vintage-radio.net/forum/forumdisplay.php?f=18)
-   -   The Thanks Thread (https://www.vintage-radio.net/forum/showthread.php?t=60832)

SiriusHardware 7th Jul 2017 6:54 pm

Re: The Thanks Thread
 
Thanks to Station X for allowing me to be the next custodian of his very carefully packed ADI-AT600 amateur radio handheld.

I'll hopefully be taking it with me into some high-up locations shortly, weather allowing.

ukcol 8th Jul 2017 9:51 am

Re: The Thanks Thread
 
A big thank you to Rich (slidertogrid) for the push button for my Ekco A410 radio. Thanks to him the Ekco is now a viable restore prospect.

I had thought the chances of obtaining this button was about zero, but no.

I just off now to the garden centre for some rocking horse manure. ;D

yampy187 8th Jul 2017 9:57 am

Re: The Thanks Thread
 
Thanks to all the forum members who help me keep my sets going with fantastic service tips and tricks. And big thanks to Lloyd for the Brc 1500 service manual. Such an excellent forum Paul and the mods provide full of genuine people and valuable information

Regards
Jan

ukcol 12th Jul 2017 10:30 am

Re: The Thanks Thread
 
Thanks to Vic (Vicboduk) for the accurate detail of the Bush DAC10 service bottom cover.

AC/HL 12th Jul 2017 2:54 pm

Re: The Thanks Thread
 
Thanks to Squipper (Paul) for the TR82C which arrived this morning. It will sing again.

Reelman 12th Jul 2017 3:47 pm

Re: The Thanks Thread
 
Thanks to David, Captainpugwash, for supplying me completely free of charge, an 8 track player and tapes. He generously took pity on me as I just missed out on another one on the forum.
Thanks again Sir!
Peter.

gezza123 15th Jul 2017 9:35 pm

Re: The Thanks Thread
 
A Big thanks to Mr.Dave Simpson for packing and sending me the
(Advance Twosome), wich has now gone to a Threesome they arrived safe and packed well.
Thanks again David,
June :wave:
Gezza123 :thumbsup:

David G4EBT 20th Jul 2017 2:37 pm

Re: The Thanks Thread
 
Sincere thanks to the following forum members who generously donated Seno and Alfac rub-down PCB transfers to me, which are no longer produced:

Neil - 'Newlite'
Bryan - 'Bryan M'
Howard - 'Omegaman'

I've made an appropriate donation to the local Hospice charity.

eddie_ce 22nd Jul 2017 9:12 am

Re: The Thanks Thread
 
Many thanks to Mike (Cobaltblue) for the generous gift of a two pin plug I was looking for, it's just the job. Once again this marvellous forum has come up trumps.

Reelman 22nd Jul 2017 11:57 am

Re: The Thanks Thread
 
Many thanks again to Captainpugwash for his continuing generosity in helping me with an 8 track collection and the means to play it.
Thank you David, much appreciated.
Peter.

TonyDuell 2nd Aug 2017 1:25 pm

Re: The Thanks Thread
 
Thanks to AC/HL for sending me the 2-part Philips N4450 service manual. It will be very useful in repairing that wonderful tape recorder.

Mikey66 3rd Aug 2017 10:30 pm

Re: The Thanks Thread
 
A big thank you to Mike Phelan for the Beovision 7700.

It was a pleasure to meet you.

bobskie 4th Aug 2017 9:29 am

Re: The Thanks Thread
 
I just found this thread, I don't know how I missed it. I have quite a few thank yous built up! I want to thank Mike(cobalt blue) for the McMichael knobs, a perfect match and looking great. Mick(vinrads) very kindly sent me a variable capacitor for my radio build, thank you. Thanks to Richard(electronicskip) for the centrecom, it may be handy one day but for now at least it's safe from the bin! I also want to thank Trevor (trifocaltrev) for sending me a lot of documentation and circuit diagrams for my Loewe radio, very useful. A final thanks goes to everyone who has helped me out with my radio build so far and with my restoration projects, without this forum I wouldn't have known where to start. Also a thanks to Paul Stenning for creating this great forum in the first place! Thanks once again all.

Cameron

paulsherwin 8th Aug 2017 1:13 pm

Re: The Thanks Thread
 
Thanks to Richard (electronicskip) for the Bluetooth headset and and its charger, which is working well and much appreciated.

Ed_Dinning 10th Aug 2017 9:03 pm

Re: The Thanks Thread
 
Many thanks to Peter (Kalee 20) for the excellent design work he did on the DAC90a. This transforms a good set into an excellent one with a few simple to do mods.

Nice one Peter!

Ed

mole42uk 11th Aug 2017 4:09 pm

Re: The Thanks Thread
 
Thanks to Richard (Noopy2014) for the Gould front panel, just exactly what I need.

eddie_ce 11th Aug 2017 5:22 pm

Re: The Thanks Thread
 
A big thank you to Al (Skywave) for the superb packaging of the Yaesu Amateur Band Rx which arrived safely today.

eddie_ce 12th Aug 2017 11:30 am

Re: The Thanks Thread
 
A big thank you to David (G4YVM) for sending a pristine 2 pin connector. I had been searching for this for quite a while, so very pleased.

lazythread 14th Aug 2017 11:26 am

Re: The Thanks Thread
 
A big thank you to Leslie5555 for the two parts record players. Very useful :)

canonman75 14th Aug 2017 3:51 pm

Re: The Thanks Thread
 
I'd just like to thank mark_in_manc for the Thurlby bench meter that arrived today.

Hopefully it'll be working again soon :)

Dave

Herald1360 19th Aug 2017 1:24 pm

Re: The Thanks Thread
 
Big thanks to John, GW4FRX for coffee and a cookie at Dobbies near Shrewsbury.

Oh, and the little Sony TV too ;D

Seems he was working with and only a few miles away, from my then employer's products more or less contemporaneously with my time in Bracknell. He also knew the term "Dim MANWEB"- perhaps the first person I've met since I left Bracknell who did!

eddie_ce 25th Aug 2017 4:59 pm

Re: The Thanks Thread
 
Many thanks to Richard (mole24uk) for his generous offer of Ge-transistors.

Refugee 25th Aug 2017 11:30 pm

Re: The Thanks Thread
 
Quote:

Originally Posted by eddie_ce (Post 970663)
Many thanks to Richard (mole24uk) for his generous offer of Ge-transistors.

Again for me too.
The post office "got" a couple but I still have a couple to play with.
I will be able to get some very good close ups with my new digital microscope and try them on my transistor test sets one new and one from the 1970s.

terrybull 31st Aug 2017 5:37 pm

Re: The Thanks Thread
 
Thanks to the mods for sorting out my mess up when I changed email address.

Reelman 1st Sep 2017 8:33 pm

Re: The Thanks Thread
 
Many thanks to slatermethuen (Andy) for the very large number of Hi-Fi magazines he has given me today. We both had concerns over the car's suspension for the journey back but fortunately our fears were unfounded despite the best efforts of the enormous Nottingham speed bumps!
In addition the Tandberg recorder is in beautiful condition and am looking forward to its restoration.
Thanks again,
Peter.

GW4FRX 11th Sep 2017 4:34 pm

Re: The Thanks Thread
 
Massive and profound thanks to Dave Wells M0CEM for the very rare transistors needed to revitalise a Radford amplifier. Thanks to him there's now a good chance of it all coming back together when all appeared lost.

The amateur spirit at its best.

Vy 73 de GW4FRX

Skywave 13th Sep 2017 10:32 pm

Re: The Thanks Thread
 
My grateful thanks to Kev (Outrun_uk) who collected a Philips VTVM for me in Liverpool and sent it on to me via courier. Kev's packing of the parcel was par excellence.

Al. / Sept. 13th.

Herald1360 14th Sep 2017 11:40 am

Re: The Thanks Thread
 
Many thanks to Nickthedentist for (decluttering his house) his generous gifts of a Freeview set top box, freeview LCD telly and a freeview HDR. ;D

My new house will now have a main telly and a bedroom telly. Bedroom one will be the little Sony CRT one from GW4FRX of recent mention with the STB.

llama 15th Sep 2017 9:45 am

Re: The Thanks Thread
 
Huge thanks to everyone suggesting a fix for my Panasonic DVD recorder, especially "Red to Black" for the complete set of documentation which allowed me to find my way around the machine and thereby fix it.
Graham

Oldelectronics 16th Sep 2017 7:39 am

Re: The Thanks Thread
 
A very grateful thank you to Tim Norris for the Maplin 10 section aerial which he kindly fetched from Maplins and sent to me.And would only accept a donation to a cancer charity next time I am in town.

Great aerials its just a pity Maplin no longer have warehouse stock as they just drop in I used heat shrink (3 layers) instead of the top grommet as the aerial wouldn't go through that grommet or any others I had that would fit in the hole where the grommet goes and I didn't want to drill the chassis or front panel holes in an effort to make them larger.

Kev

mole42uk 16th Sep 2017 11:36 am

Re: The Thanks Thread
 
Many thanks to both the Martins (Dekatron and G8UWM-MildMartin) for the new PSU design and PCB for the Sussex valve tester.

Craig Sawyers 16th Sep 2017 12:02 pm

Re: The Thanks Thread
 
Thanks to Ian Rose for a superb Sullivan Megohmeter which has found me as the new owner FOC (and very reasonable shipping).

Cheers Ian!

GW4FRX 18th Sep 2017 7:14 pm

Re: The Thanks Thread
 
Grateful thanks to Alistair D for sending the Harwin stepped pins that turned out to be ideal for making PCB connections to drilled 1/16in holes. They fit perfectly and could almost have been made for the job.

This forum restores one's faith in human nature :)

CambridgeWorks 21st Sep 2017 4:31 pm

Re: The Thanks Thread
 
Thank you kindly to Nickthedentist for sending me foc the HP338 black cartridge. I will certainly make a donation to a charity box.
Rob

electronicskip 21st Sep 2017 9:50 pm

Re: The Thanks Thread
 
Thanks to stevehertz for the two Akai video cameras.

Craig Sawyers 27th Sep 2017 11:09 am

Re: The Thanks Thread
 
Thanks to Rob (Whiskas) for the Tenma sig gen - really useful bit if kit, Cheers

Craig

eddie_ce 28th Sep 2017 5:01 pm

Re: The Thanks Thread
 
Many thanks to Michael (yesnaby) for his generous gift of authentic wander plugs.

Once again, this wonderful forum has come up trumps. :wave:

Craig Sawyers 30th Sep 2017 9:13 am

Re: The Thanks Thread
 
Thanks to Ian Rose, who worked out that I have an interest in slide rules - and just sent me one.

Cheers Ian!

Andrewausfa 7th Oct 2017 3:38 pm

Re: The Thanks Thread
 
Huge thanks to Scottart (Stephen) who drove up and met me halfway with an oscilloscope. Super chap.

:thumbsup:

Andrew

Boater Sam 9th Oct 2017 5:24 pm

Re: The Thanks Thread
 
Thanks to Mike, Dual Standard, for the drawer units to help tidy my workshop.
Collecting very late was fun in the dark of the countryside!
Sam.

Al (astral highway) 12th Oct 2017 2:31 pm

Re: The Thanks Thread
 
Massive thanks to Malcolm G6ANZ for sending me a consignment of pulse capacitors that are perfect for my current project. It feels like a lucky sign after a few recent setbacks with it!

Thanks again for your generosity and thoughtfulness, Malcolm!

See you on the forum

mole42uk 16th Oct 2017 12:53 pm

Re: The Thanks Thread
 
Thanks to Simon for a boot-ful of old oscilloscopes....

It was good to meet you!

electronicskip 18th Oct 2017 2:08 pm

Re: The Thanks Thread
 
Big thank you to stevehertz for bringing down all the N1702/V2000 Video recorders today for me ,
Also nice coffee and a chat too , thank you
Richard.

TonyDuell 20th Oct 2017 6:01 pm

Re: The Thanks Thread
 
Thanks to 'philips210' for sending me a few grip rings. One of them was a perfect replacement for the one that broke in my Philips N4450 tape recorder and this will make my repairs a bit easier.

Boater Sam 21st Oct 2017 5:50 pm

Re: The Thanks Thread
 
Big thanks to GrahamN for sending me veneer to repair the Murphy A188.

I really do owe him, he would not accept even the postage cost. Thank you Graham.

M0FYA Andy 25th Oct 2017 9:24 pm

Re: The Thanks Thread
 
Many thanks to Phil G4SPZ for the Post Office relay, received in the post today.

Andy

Wendymott 26th Oct 2017 11:24 pm

Re: The Thanks Thread
 
:)A "BIG" thanks to Jeremy G0HZU for his help and guidance with my latest project which contains various filters, of which I have no knowledge of calculating myself. There are a number of members that are worthy of note also, but to name them would be embarrassing to myself if I missed one out..... so THANK YOU ALL. :D :D :D

greg_simons 29th Oct 2017 1:33 pm

Re: The Thanks Thread
 
Many thanks to ed dinning master of all things wound who has rebuild the mains transformer for my pye qac3 project and supplied a couple of valves including the uber rare tv4 tuning indicator.
Greg.

1955APREN 31st Oct 2017 8:33 pm

Re: The Thanks Thread
 
Special thanks to Phil G4spz for putting in touch with the owner
of a grudig p1421 mtv thanks .
regards Derrick

David G4EBT 1st Nov 2017 6:26 pm

Re: The Thanks Thread
 
Many thanks to Howard, 'omegaman', for kindly sending me quite a stock of Seno 'rub-down' PCB transfers, which are no longer obtainable.

Carefully packed too, in a 'Do Not Bend' envelope. How thoughtful.

Quite the most exciting thing that's happened to me this week so far!


All times are GMT +1. The time now is 7:05 pm.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.